|Category||Surface pumps volumetric|
|Brand||SOVESI Water Pumps|
Selfpriming volumetric water pump able to offer high pressions in relation to comparatively low powers and which have
particularly steady operating curves.
It is qualified in domestic fittings, to increase the system pressure in aqueducts and for automatic water distribution
by small autoclave tanks or by hydrosphere units.
For the correct functioning of the pump, use clean water, or non-agressive liquids only, without sand or other solid
- Liquid temperature up to 60°C
- Ambient temperature up to 40°C
- Total suction lift up to 7 mt.
- Continuous duty
- Two-Pole induction motor (n = 2850 min-1)
- Insulation Class F
- Protection IP 44
- Pump body Cast Iron
- Motor Support Cast Iron
- Impeller Brass
- Shaft with rotor Stainless Steel AISI 304
- Mechanical seal Ceramic/Graphite/NBR
Registered users can share their experience with this product. Register to access all of the benefits reserved to registered users or click on login if you are already registered.